Are 2.4 GHz Cordless Phones Superior to Others?
Most people have heard about the new entrant to the telephony
market: 2.4 GHz cordless phones. These phones provide greater range
and better clarity than 900 MHz models, while offering equal and
sometimes improved security from eavesdropping. But are these phones
better because gigahertz beats megahertz in the same way gazillion
beats million? After reading this article (which includes some
technical background on cordless phones and the frequencies they
use), you should have a better idea of whether or not a 2.4 GHz
phone is a wise investment for your home or office.
Why higher frequencies can be better
Using a specific range of frequencies assigned by the Federal
Communications Commission (FCC), cordless phones send and receive
calls with technology similar to that of an FM radio. Many people
think that just because a phone uses a higher frequency its range
will be better. In actuality, the physics of wireless technology is
a little more complicated (though not much more).
There are 3 main factors that affect the quality and strength of
a cordless phone's signal: traffic, how each frequency handles
obstructions, and output wattage.
Cellular phones, cordless phones, ham radios, radio stations,
walkie-talkies, baby monitors, pagers, and many other devices
constantly transmit and receive wireless signals in the air around
you. When a few of these devices simultaneously utilize the same
frequency or bandwidth, interference is created. In order to prevent
interference, the FCC regulates which devices are allowed to
transmit on specific frequencies. When a bandwidth reaches its
traffic capacity, the FCC will usually assign another range of
frequencies to be used.
Early generations of cordless phones used the 46-49 MHz
bandwidth. Since anything with an electronic motor emits low-band
interference in this range, devices such as microwaves,
refrigerators, TVs, and computers diminished the range and clarity
of cordless conversations. In addition to these household
appliances, baby monitors and low-band pagers also occupied the
46-49 MHz range. As more people bought cordless phones and
interference became even more prevalent, it was quickly realized
that a new frequency was needed. In response, the FCC opened up the
900 MHz range.
With their improved range and clarity, 900 MHz phones became a
standard household appliance. As traffic increased on these bands
(exemplified by the neighbors' conversations many of us have heard),
the FCC opened up yet another range of frequencies: the 2.4 GHz
band. As the most recently adopted cordless phone frequency, the 2.4
GHz band offers the least interference.
How each frequency handles obstructions
When dealing with longer distances between a transmitter and a
receiver, a lower frequency usually provides better range because
the signal's wavelength is longer and can travel around obstacles.1
This is the reason why analog cellular phones (which use the 800 MHz
frequency band) often have greater range than
(which use the 1900 MHz frequency band). Therefore, one would assume
that a cordless phone utilizing the 900 MHz band would perform
better than one using the 2.4 GHz (or 2400 MHz) frequency band. Not
When a system is employed in a confined space such as an office
or home, many obstacles such as office equipment, walls, and doors,
obstruct the handset-to-base path and prevent signals from
circumnavigating barriers like they can in less densely occupied
spaces. What becomes important in these cluttered areas is a
signal's ability to be deflected and then find the reception
antenna. Low frequency signals in the 46-49 MHz range have
wavelengths of 18 feet, so they must be repeatedly deflected to
completely cover an area. Often these signals will lose their
strength before they find the receiving antenna. Because signals in
the 900 MHz range have wavelengths of only a few feet, it is easier
for them to quickly bounce off obstructions and cover an area more
If the above explanation confuses you, think about how a child
would fill in a square with a crayon: quick side-to-side movements
within the square do the job much quicker than if the child were to
wait until he or she hit an edge before changing directions.
Wavelengths (or crayon strokes) for 2.4 GHz phones are even
shorter than 900 MHz wavelengths and consequently cover (or
crayon-color) a room even quicker.
To keep neighbors from constantly hearing each other's
conversations, the FCC initially limited the output wattage for
cordless phones to just .001 watt. But when digital and
technologies (SSTs) made eavesdropping a less valid concern by
scrambling signals or dividing them across multiple bandwidths, the
allowable wattage for cordless phones was increased to 1 watt. This
action made for clearer calls and increased cordless range 3 to 4
Many 900 MHz phones have SST, as do most 2.4 GHz phones.
Unfortunately, this higher wattage is also the reason SST phones
have slightly shorter battery lives. A downside, yes, but given the
higher security and better range SST delivers, it may not be too
important for most people.
What's the bottom line?
Due to the multiple factors involved, the range and clarity of
cordless phones vary. In general, you can expect better clarity as
you move from 46-49 MHz models (which are overcrowded with baby
monitors and walkie-talkies) to 900 MHz models (which most people
use for cordless phones) to 2.4 GHz models.
As for range, here are some average maximum distances for the
different technologies. Keep in mind that these numbers are very
subjective and depend on factors such as obstructions, frequency
interference, transmission technology, and even weather. The higher
figure listed assumes ideal conditions are present.
46-49 MHz - 40 to 250 feet
900 MHz - 75 to 400 feet
900 MHz w/spread spectrum - 200 to 1500 feet
2.4 GHz w/spread spectrum - 300 to 2000 feet
In addition to its other advantages, the 2.4 GHz frequency band
is above the range that most scanners can intercept, making it much
more difficult for eavesdroppers to listen to your conversations.
So if you're willing to shell out the few extra dollars for a
high-end 2.4 GHz phone, you'll get much better call clarity, better
security, and increased range.
1 An interesting
note. The size of a signal's wavelength also determines the required
size for the antennae (both the base station's and the handset's).
The wavelengths of 46-49 MHz signals are 18 feet. In order to
"catch" the signals, both the base station and the handset need
antennae that are 2-3 feet in size. When 900 MHz phones were
introduced, antennae were downsized to just 6 inches since the
wavelength of their signals were only a foot long. 2.4 GHz phones
are even more portable and user-friendly as their antennae are only
a couple of inches long.